Bona Freshen Up 1L – Wood Floor Refresher
Bona Freshen Up is a ready-to-use, waterborne maintenance refresher designed to revive the appearance of dull and lightly worn lacquered wooden floors. It restores lustre to the existing finish, helps conceal fine surface scratches and provides a refreshed protective appearance without the need for a complete floor renovation.
Ideal for periodic maintenance between major refinishing treatments, Bona Freshen Up helps extend the attractive appearance of lacquered wood flooring. Its formulation is designed to provide an even result while maintaining the character of the existing floor finish.
Key Features
- Ready-to-use wood floor refresher
- Designed for lacquered wooden floors
- Refreshes dull and lightly worn floor surfaces
- Helps conceal fine surface scratches
- Restores lustre and improves overall floor appearance
- Provides an additional maintenance layer over the existing finish
- Waterborne formulation
- Ideal for periodic maintenance between major renovations
- Suitable for professional and domestic floor care
- Convenient 1 litre pack size
Recommended Uses
- Lacquered wooden floors
- Finished parquet flooring
- Dull or lightly worn lacquered surfaces
- Floors showing fine surface scratches
- Periodic professional floor maintenance
- Residential and suitable commercial interiors
Technical Data
| Brand | Bona |
| Product | Bona Freshen Up |
| Product Type | Wood Floor Refresher / Maintenance Treatment |
| Pack Size | 1L |
| Formulation | Waterborne |
| Ready to Use | Yes |
| Suitable For | Compatible Lacquered Wooden Floors |
| Primary Function | Refreshes Appearance & Helps Conceal Fine Scratches |
| Application | Periodic Floor Maintenance |
| SKU | UFSWP595013106 |
When to Use Bona Freshen Up
Bona Freshen Up is particularly useful when a lacquered wooden floor has become dull or developed light surface wear but does not yet require sanding and complete refinishing.
It provides a practical maintenance stage between routine cleaning and full renovation, helping restore a more uniform and attractive appearance to the existing floor finish.
Surface Preparation
The floor must be thoroughly clean and completely dry before application. Remove loose dust, grit and debris, followed by appropriate cleaning to remove grease, dirt and maintenance residues that could prevent the refresher from bonding evenly to the existing surface.
Do not apply over heavily contaminated surfaces or incompatible maintenance products without first carrying out the appropriate preparation.
Application Guidance
Shake the container thoroughly before use. Apply Bona Freshen Up evenly to the clean, dry floor using a suitable Bona applicator or approved maintenance pad.
Work systematically across the floor and maintain an even application. Avoid repeatedly working back into areas that have already started to dry, as this can affect the final appearance.
Allow the treated floor to dry according to Bona’s current instructions before allowing normal foot traffic or replacing furniture.
Bona Freshen Up vs Bona Polish
Bona Freshen Up is designed specifically to refresh the appearance of compatible lacquered wooden floors, restoring lustre and helping conceal fine scratches.
Bona Polish is a maintenance coating available in different sheen levels and is used where a more defined protective polish layer and specific Matt or Gloss appearance are required.
Important Note
Bona Freshen Up is intended for compatible finished wooden floors and must not be applied directly to bare, unfinished timber.
Always test on a small inconspicuous area where the existing finish or previous maintenance treatment is unknown. Follow Bona’s current technical instructions before treating the complete floor.
FAQs
What is Bona Freshen Up used for?
It is designed to refresh dull or lightly worn lacquered wooden floors and help conceal fine surface scratches.
Is Bona Freshen Up a floor cleaner?
No. The floor should be cleaned before application. Freshen Up is a maintenance refresher applied after cleaning.
Does it remove scratches?
It can help reduce the visibility of fine surface scratches, but it does not repair deep scratches or damage that penetrates through the existing finish.
Can it be used on bare wood?
No. It is designed for compatible finished and lacquered wooden floors.
Do I need to sand the floor before using it?
Not for normal maintenance application. The floor must, however, be thoroughly clean, dry and compatible with the product.
When should I sand and refinish instead?
If the existing coating is badly worn through, deeply scratched, damaged or exposing bare timber, a maintenance refresher will not replace proper sanding and refinishing.
Reviews
There are no reviews yet.