Bona Polish 1L – Matt & Gloss
Bona Polish is a ready-to-use, waterborne maintenance coating designed to refresh and protect compatible finished floors. Reinforced with polyurethane for increased durability, it creates a protective wear layer that helps preserve the original floor finish while improving the overall appearance of worn or dull surfaces.
Available in Matt and Gloss, Bona Polish allows the desired appearance to be selected without changing the basic maintenance system. The Matt version provides an even, low-sheen appearance, while Gloss restores additional lustre and creates a brighter, more reflective finish.
Bona Polish is suitable for a wide range of compatible finished surfaces, including sealed parquet, laminate, linoleum and PVC, making it a versatile professional maintenance treatment for both domestic and commercial environments.
Key Features
- Ready-to-use waterborne maintenance coating
- Reinforced with polyurethane for increased durability
- Available in Matt and Gloss
- Creates a protective sacrificial wear layer over the existing finish
- Helps refresh dull and worn-looking finished floors
- Excellent levelling for a smooth, consistent appearance
- No buffing required
- Suitable for domestic and commercial environments
- Approximate coverage of 50m² per litre
- Approximate drying time of 1 hour under recommended conditions
Available Finishes
| Matt | Provides an even, understated low-sheen appearance while adding a durable protective maintenance layer. |
| Gloss | Restores lustre and provides a brighter, more reflective appearance with durable protection against everyday wear. |
Suitable Surfaces
- Finished and sealed parquet flooring
- Compatible lacquered wooden floors
- Laminate flooring
- Linoleum
- PVC flooring
- Other compatible finished floor surfaces
Technical Data
| Brand | Bona |
| Product | Bona Polish |
| Product Type | Waterborne Maintenance Coating |
| Base | Acrylate / Polyurethane |
| Pack Size | 1L |
| Available Finishes | Matt / Gloss |
| Coverage | Approx. 50m²/L |
| Drying Time | Approx. 1 Hour at 20°C / 60% RH |
| Dilution | Ready to Use |
| Recommended Applicator | Bona Applicator Pad |
| Buffing Required | No |
| Application | Maintenance of Compatible Finished Floors |
| SKU | UFSBONAPOLISH1L |
Matt or Gloss?
Bona Polish Matt is the best choice where an understated appearance is preferred. It refreshes the surface while maintaining an even matt look.
Bona Polish Gloss is designed for floors where additional lustre is desired. It refreshes dull surfaces while creating a more reflective appearance. The Gloss version also meets the applicable Bona-listed slip-resistance requirement.
Surface Preparation
The floor must be completely clean and dry before application. Remove loose dirt, dust and grit, then clean the surface thoroughly to ensure that contamination is not trapped beneath the new maintenance coating.
If the floor already has a significant build-up of polish or an incompatible maintenance treatment, the existing layer may need to be removed with a suitable Bona polish remover before applying a fresh coat.
Application Guidance
Shake the container thoroughly before use. Apply a thin, consistent layer using a Bona Applicator Pad, working in the direction of the wood grain where possible.
Avoid repeatedly working back into areas that have already started to dry, as this may create visible application marks or differences in sheen.
Allow approximately 1 hour before light foot traffic under normal drying conditions. Where a second coat is required, follow Bona’s current instructions regarding the minimum recoating time.
Important Note
Polish and refresher treatments can alter both the sheen level and slip resistance of the existing floor surface. Bona specifically advises against applying polish or refreshers over surfaces such as Bona Traffic HD Anti Slip or Bona Traffic HD Raw where their original surface characteristics need to be maintained.
Always test the product on a small inconspicuous area when the existing floor finish or previous maintenance treatment is unknown.
FAQs
What is Bona Polish used for?
It is a maintenance coating used to refresh compatible finished floors and add a protective wear layer over the existing surface.
What is the difference between Matt and Gloss?
Matt provides a lower-sheen appearance, while Gloss produces more lustre and surface reflection.
Does Bona Polish need to be diluted?
No. For normal polish application it is supplied ready to use.
How much area does 1 litre cover?
Approximately 50m² per litre under normal application conditions.
How long does Bona Polish take to dry?
Approximately one hour at around 20°C and 60% relative humidity before light use.
Does Bona Polish need buffing?
No. Bona Polish is designed to provide an even finish without buffing.
Can I apply it over Bona Traffic HD Anti Slip?
Bona advises against this because a polish layer can alter the original slip-resistance characteristics of the surface.
Reviews
There are no reviews yet.