Bona AntiSlip R10 125g – Anti-Slip Additive for Floor Lacquers

Bona AntiSlip R10 125g – Anti-Slip Additive for Floor Lacquers

Bona AntiSlip R10 is a professional anti-slip additive designed to increase the slip resistance of compatible Bona waterborne floor finishes. When mixed into the lacquer before application, the additive creates a subtly textured finished surface that helps achieve an R10 slip-resistance classification.

It is particularly useful for wooden floors in areas where additional grip and improved slip resistance are required. Bona AntiSlip R10 integrates directly into the compatible coating system, allowing contractors to improve floor safety while retaining the protective performance and appearance of the selected Bona finish.

Key Features

• Professional anti-slip additive for compatible Bona floor finishes
• Helps achieve R10 slip resistance
• Improves grip on finished wooden floors
• Mixed directly into the floor lacquer before application
• Designed for use within Bona professional coating systems
• Convenient pre-measured 125g pack
• One 125g unit is used per 5 litres of compatible Bona finish
• Ideal where increased slip resistance is required

Mixing Ratio

Use 1 x 125g pack of Bona AntiSlip R10 per 5 litres of compatible Bona floor finish.

• Finish quantity: 5 litres
• AntiSlip R10 quantity: 125g
• Add to the compatible finish before application
• Mix thoroughly to distribute the additive evenly
• Continue to follow the application instructions for the selected Bona finish

Recommended Uses

• Professional wooden floor finishing
• Floors requiring increased slip resistance
• Residential and commercial interiors
• Entrances, corridors and circulation areas
• Other compatible areas where additional grip is desirable

Technical Data

Brand	Bona
Product	AntiSlip R10
Product Type	Anti-Slip Coating Additive
Pack Size	125g
Mixing Ratio	1 x 125g per 5L of Compatible Finish
Slip Resistance	R10
Application	Mixed into Compatible Bona Floor Finish
Use	Professional Interior Wood Flooring
SKU	UFSAX50006200

Application Guidance

Add one complete 125g pack of Bona AntiSlip R10 to 5 litres of the compatible Bona floor finish. Mix thoroughly before application to ensure the anti-slip particles are distributed evenly throughout the coating.

Apply the prepared finish according to the technical instructions for the selected Bona coating. Maintain an even application rate across the entire floor to achieve a consistent appearance and slip-resistant surface.

Important Note

Bona AntiSlip R10 is an additive and must not be used as a standalone floor treatment. Always confirm compatibility with the specific Bona finish being used and follow the current Bona Technical Data Sheet for the complete coating system.

FAQs

What does Bona AntiSlip R10 do?
It is added to a compatible Bona floor finish to increase surface grip and help achieve an R10 slip-resistance classification.

How much Bona AntiSlip R10 should I use?
Use one complete 125g pack per 5 litres of compatible Bona floor finish.

Do I apply AntiSlip R10 directly to the floor?
No. It must first be mixed thoroughly into the compatible floor finish before application.

What does R10 mean?
R10 is a slip-resistance classification indicating increased surface grip compared with a standard smooth floor finish.

Can I add more than one pack to 5 litres?
Use the specified mixing ratio of one 125g pack per 5 litres unless Bona’s current technical documentation for the selected coating system states otherwise.